Tag Archives: Tesla

Model Y Series: Episode 18: Instrument Panel Assembly & MY-M3 Comparison

Episode 18: Instrument Panel Assembly & MY-M3 Comparison

Welcome back to episode 18 of Munro’s Tesla Model Y Performance teardown, where Munro & Associates CEO Sandy Munro takes a look at the vehicle’s instrument panel (IP) assembly.

In this episode, Sandy gives an overview of the IP from how it’s mounted and the HVAC system, to the cross car beam design and steering system.

While also comparing the IP design to the Model 3, Sandy shares the similar features he’s found, many of which he’s happy to see.

You can see the full details on the IP design and Model 3 comparison here.

Also, be on the lookout for the next episode, where Sandy will be sharing more in-depth details of the HVAC system.

Interested in more? Visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!

Model Y Series: Episode 17: Next-Gen Wiring (Or Not), Front EDM Mounting, and Octovalve Preview

Episode 17: Next-Gen Wiring (Or Not), Front EDM Mounting, and Octovalve Preview

Here is episode 17 of Munro’s Tesla Model Y Performance teardown, where Munro & Associates CEO Sandy Munro comments on the construction of the low voltage wiring harness, mounting cross-compatibility for the front Electric Drive Module (EDM) and the infamous octovalve assembly.

Sandy starts this segment with a discussion about the Model Y’s wiring, commenting that he was “kinda disappointed” as he expected a tremendous reduction. During this first pass, he doesn’t see that this is the case, but does point out that the gauge looks smaller. He also comments that he was disappointed that he didn’t see a dual directional cable that would enable the Model Y to power a house or another car.

Moving to the front of the vehicle, Sandy notes that the Model Y had the potential to pop in a second induction motor in the single motor application. He also previews the octovalve, which feeds power to everything that had to be cooled or heated. He notes some initial observations that have made him happy and anticipates that the disassembly may be done this week.

Check out the full segment details here.

Interested in more?  You can always visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!

Model Y Series: Episode 16: MY – M3 Electric Motor Comparison & Industry Review

Episode 16: MY – M3 Electric Motor Comparison & Industry Review

Welcome to episode 16 of Munro’s Tesla Model Y Performance teardown, where Munro & Associates CEO Sandy Munro compares the Model Y electric drive modules (EDMs) to the Model 3.

Also in this episode, Sandy gives an industry overview of the EDMs Munro has reviewed, including the Nissan Leaf, Audi eTron, Jaguar iPace, Chevy Bolt and BMW i3.

You can view the full comparison and review here.

Interested in more?  You can always visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

If you’ve been wanting a one-of-a-kind piece of keep sake from this teardown, Munro is selling Model Y various parts off of the Model Y signed by the man himself, Sandy Munro. You can find more updated products here: https://munrolive.com/access-%2F-shop.

Model Y Series: Episode 15: Tailor Welded Blanks, Body Side Inner, Welding Comparison MY-M3, Parts Raffle!

Episode 15: Tailor Welded Blanks, Body Side Inner, Welding Comparison MY-M3, Parts Raffle!

Welcome to episode 15 of Munro’s Tesla Model Y Performance teardown, where Munro & Associates CEO Sandy Munro walks us through what a tailor welded blank is, why it’s useful, where it’s used on the Model Y and where it wasn’t used on the Model 3. After the welding comparison, Sandy shares that he views the Model Y as a “pretty good build,” which is high praise considering the number of teardowns he has analyzed.

In this segment, Sandy also analyzes the construction of the body side inner (BSI) ring, as well as offers a comparison between the door flange welds on the Model 3 vs. the Model Y. You can see the full details of Sandy’s comment here.

Lastly, Sandy announces that Munro is starting a product raffle with selected parts from the Model Y teardown! Don’t miss your chance to own a piece of the teardown experience! Any of these parts would be a great addition to any enthusiast’s garage, and the proceeds from the sale will help keep Munro moving forward with the Model Y teardown.

By purchasing a ticket, you’ll be entered into a drawing to win one of three Tesla Model Y teardown parts – a Suspension Link Shield (shown in the picture, signed in Episode 15), a Fender-Mounted Camera/Side Marker (Episode 7), and the “Lone Screw” from the Trunk tub (shown in the picture, Episode 15). Raffle tickets will continue to be sold up through April 29th at midnight EST, after which a live-streamed drawing will be held on our YouTube channel on Thursday, April 30th at noon to select and announce the winners.

Visit www.munrolive.com to purchase tickets and for full contest rules. Good luck!

Interested in more?  You can always visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference! #keepthechange

Model Y Series: Episode 14: Rear Mega Castings and Structure, Trunk Tub, Potential Tow Location

Episode 14: Rear Mega Castings and Structure, Trunk Tub, Potential Tow Location

Hello again. This is episode 14 of Munro’s Tesla Model Y Performance teardown, where Sandy addresses viewer feedback and questions, a phone from call from Tesla, a review of the rear mega castings and structure, a comparison of the Model 3 and Model Y trunk tubs, and a potential strategy for the addition of a hitch. Let’s dive in!

The segment begins with Sandy addressing four viewer comments:

  1. One new Model Y owner commented that he didn’t like the noise coming from the heat pump. Sandy agreed and noted that the Model 3 had a compressed pump case to help with the noise. He also shared he got a phone call from Tesla informing him of a running change to add this case back in.
  2. Another viewer noted a problem with un-syncing the climate control for each side. Sandy offered a workaround: using the voice control to “un-sync climate control.”
  3. One viewer commented that there’s a heater in the front bumper for the radar, which Sandy confirmed.
  4. One viewer noted that Tesla dropped the auto-dim for the wing mirrors and that people want that back.

Sandy then moved on to highlight some elements that made him happy, including the casting. He points out key features, as well as a brief comparison with the Model 3. Moving on, he discusses one of his “favorite redesigns,” which is the trunk tub. During his analysis, he offers some design improvement suggestions, as well as a comparison to the Model 3 truck tub. He closes out this segment with a look at a close out that exposes part of the bumper beam to enable a hitch.

You can see the full details of Sandy’s comment here.

Interested in more? Visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!

Elon Musk Appreciates Munro’s High-quality Feedback on the Tesla Model Y

As Munro & Associates CEO Sandy Munro captures his teardown of the Tesla Model Y Performance, many are sharing his thoughts and findings on Twitter.

Elon Musk, co-founder and CEO at Tesla replied to one of the discussions on Twitter stating “High quality critical feedback from Munro & Co is much appreciated!”

If you’re interested in the full details about Munro’s Tesla Model Y discovery process that Elon is referring to, you can visit www.MunroLive.com for regular insights from Sandy.

Also, during this challenging time, Sandy is encouraging others to pay it forward and offers one way to do so after witnessing what happened after giving back to a cashier at a local store. Listen to his message here: https://youtu.be/927-Rb6suPc?t=255.

 

Originally posted on Apr 3, 2020.

Model Y Series: Episode 13: Comparing Model 3 eAC to Model Y Heat Pump

Episode 13: Comparing Model 3 eAC to Model Y Heat Pump

Welcome back to episode 13 of Munro’s Tesla Model Y Performance teardown, where, Munro & Associates CEO Sandy Munro compares the Model 3 eAC compressor and NVH provisions to the isolated heat pump on the Model Y.

After sharing the details of the Model 3 AC compressor, Sandy goes into detail on how the heat pump on the Model Y functions,  how it affects the cooling pack and why this change in the Model Y is the right way to go.

You can see the full details of Sandy’s comparison and summary of the functionality of the Model Y heat pump by viewing the video here.

Interested in more? Visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!

Model Y Series: Episode 12: Floorpan, EPP Floor Risers, Commonality through Stanchions and Wiring Observations

Episode 12: Floorpan, EPP Floor Risers, Commonality through Stanchions and Wiring Observations

This is episode 12 of Munro’s Tesla Model Y Performance teardown, where Munro & Associates CEO Sandy Munro shares observations on the geometry of the floorpan, strategies for raising the floor height, enablers for re-use of Model 3 components and initial thoughts on some of the high and low voltage wiring.

Sandy starts by removing the expanded polypropylene flooring and notes that this was used so the Model Y could use the same floorpan as the Model 3. After noting other similarities, and some differences, he points out the “double good idea” of the unpainted steel on the seats, as it is both a cost saver and an environmentally conscious choice.

He then moves to the back of the vehicle to analyze the connection for the charge port, where he discusses the “orange stuff.” While this is typically used to reduce noise, he discovers a pipe underneath that contains heavy cables. Sandy considers this two good ideas in one because 1) it provides a perfect fit every time and 2) it’s smaller and lighter than what was used in the Model 3. He moves on to make some other interesting comparisons to the Model 3 cables.

The video finishes with Sandy’s comments on the stanchions, applauding Tesla’s design that enables the seats to sit higher (good for SUVs), while using the same seats, console and (most likely) IP as the Model 3. You can see the full details of these features in the Tesla Model Y by viewing the video here.

Interested in more? Visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Model Y Series: Episode 11: Teardown Progresses and Sandy Munro Gets into the Finer Details

Model Y E11: Door Flange Welds, SPRs, HIC, ABS changes, and EPP foam

Episode 11: Teardown Progresses and Sandy Munro Gets into the Finer Details

Welcome back to episode 11 of Munro’s Tesla Model Y Performance teardown, where, Munro & Associates CEO Sandy Munro starts to get into the finer details of the car as the teardown progresses.

In this episode, Sandy covers a number of details, including door flange welds, self-piercing rivets for joining dissimilar materials, head impact countermeasures in the trim and headliner, changes to the anti-lock brake system and EPP (expanded polypropylene) foam reinforcements in the floor.

You can see the full details of these features in the Tesla Model Y by viewing the video here.

Interested in more? Visit www.MunroLive.com for full details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!

Model Y Series: Episode 10: Potential 3rd Row Seating, Ingress/Egress, Rear Door Service Latch

Potential 3rd Row Seating, Ingress/Egress, Rear Door Service Latch

Episode 10: Potential 3rd Row Seating, Ingress/Egress, Rear Door Service Latch

Welcome back to episode 10 of Munro’s Tesla Model Y Performance teardown. In this episode, Munro & Associates CEO Sandy Munro looks at the possibility of third row seating, emergency exits and the rear door service latch.

Starting by looking at the possibility of third row seating, Sandy demonstrates how he thinks the rear-facing seating would work on the vehicle and how to exit in an emergency situation.

He next takes a look at the rear door service latch and shares his recommendation on how to make it better and more cost effective.

You can see the full details for these features in the Tesla Model Y by viewing the video here.

Interested in more? Visit www.MunroLive.com for all the details about Munro’s Tesla Model Y discovery process. This site will offer regular insight from Sandy, interactive data and reports, and livestream from Munro’s headquarters.

Also, please consider Sandy’s suggestion for how to pay it forward during these challenging times. Together we have the ability to make a difference!